Patios & paths
Sandstone, limestone, porcelain and concrete slabs — cleaned at the correct pressure with rotary heads, never blasted flat.
Pressure washing · Thame, Oxfordshire
Pressure washing, done properly.
The right pressure, the right nozzle, the right cleaner — across patios, driveways, paths and hard surfaces in Thame, Marlow, Beaconsfield and the surrounding villages. Trusted by 135+ homeowners.
Reply within 1 working day · Fixed price before we start · Fully insured
- Turn up on time (five minutes early)
- Reply to every enquiry within a day
- Do what we say we'll do
- Leave your home better than we found it
Craft, not brute force
The pressure matters. So does the pause.
Anyone can hire a jet wash. Doing it properly — matching the method to the surface, pre-treating the dirt, using rotary heads for an even finish — is a craft. That's the difference between a clean patio and one with stripes across it.
- Correct pressure and nozzle for every surface
- Rotary cleaning heads for a stripe-free finish
- Pre-treatment lifts the dirt so we don't rely on brute force
- Debris rinsed away, joints inspected, area left tidy
Every surface, done properly
Where pressure washing is the right method.
Hard, robust surfaces respond well to controlled pressure. For render, roofs and delicate finishes we soft wash instead — see the render page for that method.
Block-paved driveways
The classic pressure-wash job — deep clean the blocks, then optional re-sanding to lock the joints back in.
Concrete & tarmac
Oil-stained concrete pads, garage floors and tarmac drives cleaned with the right cleaners and controlled pressure.
Decking & timber
Softer timber decking cleaned at low pressure with the right chemistry — never gouged, never fibred out.
How it works
A calm, controlled clean.
No blasting, no rushing, no stripes across the slabs. Every pressure-wash job follows the same four steps.
- 01
Assess
We match method, pressure and chemistry to the surface — never the other way around.
- 02
Pre-treat
A safe cleaner is applied where needed so the pressure does less of the work.
- 03
Clean
Controlled, overlapping passes with the rotary head produce an even, streak-free finish.
- 04
Rinse & tidy
The area is rinsed, debris swept, and the surface left ready to walk on.
Honest guide prices
What pressure washing costs.
Priced by surface size, condition and access. Most jobs are quoted from a few photos and a couple of measurements — you always get a firm fixed price in writing before we start.
See full pricing guideSmall path or side return
Ideal add-on to a patio or driveway job.
from £120
Standard patio (up to 40 m²)
Full patio cleaned and rinsed.
from £250
Standard block driveway
Block-paved drive, wash and rinse. Re-sanding priced separately.
from £350
Larger areas & combos
Patio + driveway + paths in one visit — quoted together.
POA
Recent work
A few from the last few months.
Beaconsfield
Porcelain Patio Cleaning in Beaconsfield
Beaconsfield
Driveway Cleaning in Beaconsfield
Thame
Driveway Restoration in Thame: Bringing a Weathered Driveway Back to Life
Marlow
Sandstone Patio Restoration in Marlow: Bringing a Beautiful Patio Back to Life
Haddenham
Full Patio Restoration on a Modern Property in Haddenham
Chinnor
Patio Restoration at Beautiful Country Home Near Chinnor
In your area
Pressure washing across Thame, Marlow, Beaconsfield, Princes Risborough and the surrounding villages.
See areas we coverFAQs
Pressure washing questions, answered.
What's the difference between pressure washing and soft washing?+
Pressure washing uses water pressure to physically clean hard surfaces. Soft washing uses specialist chemistry at very low pressure — the right method for render, roofs and delicate surfaces. Both have their place; we use whichever one is right for the job.
Can pressure washing damage my patio or driveway?+
It can, when used at the wrong pressure or with the wrong nozzle. We only use pressure washing where it's genuinely the right method, at the pressure the surface can take. We never blast, and we never rush.
Do you provide water?+
We bring all the equipment, but we do need to connect to your outside tap. A working supply is required on site.
Will you re-sand my block paving?+
Yes — re-sanding is priced separately as an add-on to a driveway or patio clean. See the patio and driveway pages for details.
How long does the finish last?+
A properly cleaned patio typically stays looking good for two to three years before it needs attention again. A yearly rinse extends that further.
Do I need to be home?+
No. As long as we have access and an outside tap, you don't need to be there. We send before and after photos on completion.
Request a fixed quote
Reply within 1 working day.
A couple of photos and rough measurements are usually enough for a fixed price. WhatsApp is quickest.
Ready when you are
Get your fixed quote today.
Send a few details and we'll come back with a same-day, fixed-price quote wherever possible.